Skip to main content
Energy Review
Last updated: 17 November 2026

British Gas Half-Price Electricity Guide 2026

British Gas PeakSave gives smart meter customers 50% off electricity every Sunday from 11am to 4pm, returning savings directly as bill credit.

British Gas Half-Price Electricity Guide 2026

British Gas Half-Price Electricity: PeakSave and Smart Tariffs Explained

Key takeaways
•PeakSave Sundays gives eligible British Gas customers half-price electricity every Sunday between 11am and 4pm.
•You must have an operational smart meter sending half-hourly readings to receive the discount.
•The 50% discount applies solely to your electricity unit rate, while normal daily standing charges still apply in full.
•Standard PeakSave Sundays works as an add-on to your existing tariff, so you do not need to switch plans to participate.
•Savings are returned as bill or meter credit, with payment timing depending on the scheme and how you pay.

British Gas offers several ways for household energy customers to access discounted electricity during lower-demand periods. The central initiative is PeakSave, a demand-shifting scheme that rewards households for using electricity when nationwide demand is low or when renewable generation is high. Over 1.2 million households in Great Britain have enrolled in the scheme since its launch, shifting tens of thousands of megawatt-hours of power away from peak hours.

The British energy system is undergoing a shift away from traditional flat-rate tariffs. In the past, energy suppliers charged the exact same unit rate for electricity regardless of when you turned on an appliance. Smart meters now allow energy suppliers to offer time-of-use pricing and targeted discount events. By encouraging customers to run energy-heavy appliances outside peak evening hours, suppliers help reduce stress on the national grid.

British Gas runs these schemes in alignment with system flexibility goals managed by the National Energy System Operator (NESO). During peak hours, usually between 4pm and 7pm on weekdays, grid operators often have to turn on expensive fossil-fuel power plants to meet customer demand. When households shift power use to off-peak periods, it cuts reliance on gas-fired generation, lowers wholesale balancing costs across the network, and cuts carbon emissions.

Understanding how these discounts operate helps you decide whether to stick with standard PeakSave event credits or switch to a dedicated time-of-use tariff. While the basic Sunday scheme works alongside almost any British Gas plan, specialised smart tariffs offer fixed off-peak rates tailored for electric cars or heat pumps.

Affiliate
Thinking about switching to Octopus?

Use our referral link, and we'll both get £50 credit once your switch is complete.

Existing customer? Find out how you can benefit too. T&Cs apply (only one switching offer per household)

How the Standard PeakSave Scheme Works

The foundation of the scheme is PeakSave Sundays. This regular discount event gives participating British Gas domestic electricity customers 50% off their electricity unit rate every Sunday from 11am to 4pm. This five-hour window gives households a predictable weekly period to run laundry, cook meals, or charge devices at half price.

PeakSave Sundays acts as a free add-on rather than a separate tariff. If you are on the standard variable tariff, a cap tracking plan, or a fixed deal, you can sign up without changing your contract terms. For example, customers on the standard variable tariff pay an average unit rate of 25.355p per kWh. During the five-hour Sunday window, the effective unit cost drops to around 12.68p per kWh after your half-price credit is applied.

For households seeking a longer discount window, British Gas also offers a dedicated tariff called PeakSave Super Sunday. Unlike the standard scheme, Super Sunday is a fixed-term smart tariff that provides an eight-hour half-price window every Sunday from 9am to 5pm. Because it is a separate tariff rather than an add-on, the lower unit rates are built directly into your billing schedule. British Gas says that once you switch to a PeakSave Super Sunday tariff, you cannot switch back to the PeakSave Sundays add-on.[1]

As well as weekly Sunday events, British Gas runs short, flexible sessions called PeakSave Green Flex. These events are triggered when weather conditions create excess renewable electricity from wind or solar farms across Great Britain. Green Flex events usually run for one or two hours on weekdays or Saturdays. British Gas invites participants to upcoming Green Flex events. You must opt into each individual event before it starts to receive half-price electricity.[2]

Scheme or TariffDiscount WindowHow Savings WorkTariff Switch Needed?
PeakSave Sundays11am to 4pm every Sunday (5 hours)50% unit rate discount returned as bill creditNo (works on existing plan)
PeakSave Super Sunday9am to 5pm every Sunday (8 hours)Half-price unit rates built into fixed planYes (must switch to Super Sunday tariff)
PeakSave Green Flex1 to 2 hour pop-up sessions50% unit rate discount returned as bill creditNo (must opt into each event before it starts)

Specialised Tariffs for Electric Vehicles and Heat Pumps

While standard PeakSave events focus on weekend daytime usage, households with high electricity demand often need cheap power during the week. British Gas offers dedicated time-of-use tariffs for electric vehicle (EV) drivers and homes with low-carbon heating systems.

For electric car owners, British Gas offers EV Power, with a cheaper overnight electricity rate. Check your personalised quote for the current rate and off-peak hours. Charging a standard car battery during these overnight hours can save hundreds of pounds a year compared to charging at standard daytime rates. EV drivers can still join PeakSave Sundays to get half-price electricity for domestic chores during the day.[1]

For homes using electric heat pumps, British Gas offers the Heat Power tariff. This plan provides 10 hours of half-price electricity every single day. The off-peak window is split into two blocks: seven hours overnight from midnight to 7am, and three hours in the afternoon from 1pm to 4pm. This structure allows heat pumps to warm the home and boost hot water tanks during cheaper periods, cutting overall heating bills.

Fixed-term plans differ significantly from standard PeakSave event credits. Tariffs like the Fix and Fall plan, which locks in prices for 24 months with a £125 exit fee per fuel, or the Cap Tracker plan with a £25 exit fee per fuel, set fixed conditions for how you are billed. If you choose a dedicated smart tariff like EV Power or Super Sunday, check whether exit fees apply if you decide to change plans later.

Deciding between standard PeakSave and a dedicated smart tariff depends on your home equipment. If your main electricity use comes from standard appliances like dishwashers and washing machines, standard PeakSave Sundays offers flexible savings without contract lock-ins. If you charge a car battery or heat your home with electricity every day, a dedicated smart tariff may save more, depending on how much usage you can shift. Compare total annual costs, including peak rates, standing charges and any exit fees.

Eligibility and Smart Meter Requirements

To take part in PeakSave events or switch to smart time-of-use tariffs, you must meet specific account and technical criteria. The scheme is open to domestic electricity customers supplied by British Gas in England, Scotland, and Wales. Customers in Scotland billed under Scottish Gas or in Wales under Nwy Prydain are also eligible.

A working smart meter is mandatory. Your smart meter must send half-hourly meter readings to British Gas. The half-hourly setting is essential because British Gas needs precise 30-minute data to calculate exactly how much electricity you consumed during the discount window.

Both first-generation (SMETS1) and second-generation (SMETS2) smart meters can be used, provided they are connected to the central Data Communications Company (DCC) network. If you have an older SMETS1 meter that has not yet been migrated to the national network, or if your meter is out of communication, British Gas cannot receive your half-hourly data. Standard credit meters and non-smart prepayment meters cannot participate.

Smart meter technical issues can occasionally disrupt savings. If British Gas cannot obtain your readings for PeakSave Sundays, it still credits your account using an estimate based on other PeakSavers' smart meter data and your unit rate. Dedicated PeakSave tariffs work differently: if your bill does not show the half-price rate, contact British Gas.

If you already participate in another flexibility scheme, check both schemes' eligibility and participation terms before joining. Compatibility depends on the particular services involved.

If your smart meter stopped sending automatic readings, contact British Gas customer support to request a remote meter reboot. You can also check your online account dashboard to verify that your meter reading frequency is set to half-hourly.

Receiving Your Discount as Bill Credit

Understanding the financial mechanics of PeakSave helps prevent confusion when reading your monthly bill. When you use electricity during a half-price Sunday window or Green Flex event, your smart meter records the consumption as normal. You are initially charged your standard tariff unit rate for that power.

After the event closes, British Gas processes your half-hourly usage data. They calculate 50% of the unit cost for all electricity consumed within the discount hours, including VAT. This amount is then returned to your account as bill credit labelled as PeakSave Credit.

A critical point to keep in mind is that daily standing charges are not discounted. The standing charge covers fixed network maintenance, meter costs, and administration fees. Whether you are on the standard variable tariff with a 51.452p daily standing charge or paying the Ofgem price cap national average of 54.83p per day, you pay the full daily standing charge on Sundays regardless of how much electricity you shift.

Credit payment timelines vary slightly depending on how you pay for your energy. For credit accounts, event credits normally appear within two weeks, although they can take longer. For smart prepayment customers, Green Flex credits are added monthly, normally within 10 working days after the month ends. Check the payment timetable for the particular PeakSave scheme you use.

Heads up: Always check your monthly statement under account transactions. PeakSave savings do not lower your baseline unit rate on your main bill breakdown; they appear as a separate credit entry reducing your overall balance.

How to Register for Half-Price Events

Getting started with half-price electricity events is straightforward if you are already a British Gas customer with a communicating smart meter. Existing customers do not need to sign a new energy contract to join the standard PeakSave Sundays scheme.

Steps to sign up for PeakSave events
1
Log into your account
Access your British Gas account online or open the official mobile app on your phone.
2
Check smart meter consent settings
Ensure your meter data sharing preference is set to half-hourly readings so British Gas can track your event usage.
3
Navigate to the PeakSave section
In your online account, select 'Change' or 'Switch' tariff to choose a PeakSave tariff. British Gas confirms PeakSave Sundays continues for people already on it, so use an opt-in only if your account offers one.
4
Enable notifications
Turn on app push alerts or email notifications to make sure you receive invites for short Green Flex discount events.
5
Review fixed tariff options
If you prefer a longer Sunday window or dedicated off-peak rates, check the tariff comparison tool in your account for PeakSave Super Sunday, EV Power, or Heat Power.

Once registered, you remain opted in for all future Sunday events automatically. To maximise your savings, plan energy-intensive chores around the off-peak hours. Running washing machines, tumble dryers, dishwashers, or electric hobs between 11am and 4pm on Sundays ensures you make full use of the 50% discount.

Frequently asked questions

Do I need a smart meter to get half-price electricity from British Gas?

Yes. You must have a working smart meter that sends half-hourly readings to British Gas. Standard credit meters or traditional prepayment meters cannot record usage in 30-minute intervals, so they cannot qualify for PeakSave credits.

Does the half-price discount apply to the daily standing charge?

No. The 50% PeakSave discount applies solely to the electricity unit rate (pence per kWh) consumed during the specified event hours. Daily standing charges remain unchanged and are billed at your standard daily rate.

Can existing fixed-rate customers join the PeakSave scheme?

Yes. Standard PeakSave Sundays works as a free add-on to existing tariffs. Whether you are on a fixed-rate deal, a cap tracking tariff, or the standard variable tariff, you can opt in without altering your contract terms or paying exit fees.

How long does it take for the electricity credit to appear on my bill?

It depends on the scheme and how you pay. For Green Flex events, credit accounts normally get the credit within two weeks, though it can take longer, and smart prepayment customers get it on their meter each month, normally within 10 working days after the month ends. British Gas also sends a monthly PeakSave summary.

What happens if my smart meter loses connection during a discount event?

On PeakSave Sundays, you are still credited: British Gas works out an average from other PeakSavers' smart meter data for the five-hour window and multiplies it by your unit rate. On a dedicated PeakSave tariff, contact British Gas if your bill shows no electricity at the half-price rate.

Can I join PeakSave if I live in Northern Ireland?

No. British Gas PeakSave events and time-of-use tariffs are available only to domestic electricity customers in Great Britain (England, Scotland, and Wales). Energy supply in Northern Ireland is governed by a separate regulatory framework.

Related reviews and comparisons

Related guides

Rob Gibbs

Written by

Rob Gibbs

Hi, I'm Rob, and I run Energy-Review.co.uk. I initially started this project in 2018 when I was looking to switch energy suppliers and found there wasn't a website that provided simple, data-backed reviews on all the suppliers available. Since then, I have spent a lot of time (too much, some may say!) looking at all publicly available data about each supplier and writing reviews using this information. These reviews are updated as regularly as possible, and any data is backed up by a source where necessary. I have also started writing guides on various energy-related topics, which hopefully you will find useful. If you find any issues, please use our contact form to let us know.