EDF Pod Point Plug & Power review (August 2026)
A two-year fixed EV tariff combined with a Pod Point Solo 3S home-charger purchase, with seven overnight off-peak hours.
Updated for August 2026
Tariff snapshot
The important details in one place
- Current tariff issue
- Pod Point Plug & Power 24m v2
- EDF_PODPOINT_EV_PANDP_FIX_24M_V2_HH
- Price changes
- By time band
- The same scheduled price periods repeat each day
- Against the price cap
- Choose a location
- Compares today’s regional average unit rate with the applicable cap rate
- Estimated annual cost
- Choose a location
- Shown after an electricity region is selected
Key tariff facts
- The same scheduled price periods repeat each day
- 24-month fixed term
- Compatible smart meter required
- Electricity tariff
- Regional unit rates and standing charges
The short answer
Who EDF Pod Point Plug & Power is most likely to work for
Pod Point Plug & Power can be a practical route into home charging for an EV owner who wants a Solo 3S and is comfortable spreading part of the cost over two years. The overnight tariff is useful, but the charger arrangement is the real reason this product needs its own review.
It is a poor comparison against an electricity-only deal if the hardware commitment has been ignored. Check installation suitability, the full charger payment terms and the consequences of moving or leaving early before putting too much weight on the off-peak rate.
Pod Point Plug & Power is not just an electricity tariff. EDF and Pod bundle it with a Pod Point Solo 3S home charger: the customer pays a reduced upfront amount and spreads the remaining charger cost over a two-year fixed tariff.
The electricity tariff has a seven-hour overnight band, from 11pm to 6am, with a higher fixed rate outside it. The live rates and electricity estimate on this page cover energy; the charger purchase and its separate terms still need to be read alongside them.
In its favour
- Combines a home-charger purchase with an EV electricity tariff
- Seven-hour off-peak window from 11pm to 6am
- Fixed energy rates for the two-year term
- Solo 3S charger is compatible with all EV makes and models
- Five-year charger-and-installation warranty in the current bundle
Against it
- Two-year commitment, not a simple tariff-only switch
- Charger costs and installation terms require separate review
- Day rate applies outside the overnight window
- Requires a connected smart meter with half-hourly readings
How it works
How EDF Pod Point Plug & Power sets its prices
The electricity part is a repeating two-rate tariff. Electricity used from 11pm to 6am is billed at the off-peak rate, while use outside the window is billed at the day rate. Both are fixed for the two-year tariff term.
The product also gives the customer a route to buy a Pod Point Solo 3S charger for a lower upfront payment, with the remaining charge-point cost spread through the two-year arrangement. That is why this should be compared as an energy-and-hardware commitment, not only against another night rate.
EDF says a fully connected smart meter with half-hourly readings is required for its EV tariffs. The charger is compatible with all EV makes and models, but installation requirements and any extra works are assessed separately by Pod.
The current bundle includes a five-year warranty covering the charger and installation. EDF says 90% of customers qualify for its standard installation, but that is not a guarantee for a particular property.
Things to watch
The main trade-offs
This is a two-year energy and charger commitment. Compare the full charger terms and early-exit provisions as well as the electricity rates.
The headline overnight rate does not cover electricity used before 11pm or after 6am, and the day rate still affects the rest of the household bill.
EDF says 90% of customers qualify for standard installation. Pod still assesses each property and may quote separately for work outside the standard scope.
The energy-cost calculator cannot turn the full bundle into a personalised hardware quote; use it to understand electricity use, then add the charger terms from Pod.
Live tariff data
EDF Pod Point Plug & Power prices for your area
Electricity rates and standing charges differ by distribution region. Enter your postcode or choose your electricity region before local figures are shown.
Practical advice
Getting the most out of EDF Pod Point Plug & Power
Assess the full bundle before comparing a pence-per-kWh headline
Use the electricity estimator for your expected charging and household use, then add the charger’s upfront and remaining costs from the current Pod offer. The lowest night rate does not automatically mean the lowest two-year cost.
Check installation suitability early
Off-street parking, Wi-Fi or an appropriate connection, landlord permission where relevant, and the existing electrical setup can all affect whether the standard installation is suitable for your home.
Make the overnight window do the work
Schedule charging between 11pm and 6am, and move other flexible household loads there where safe. That is what turns the off-peak price into a real saving rather than a rate you rarely use.
Household fit
Who EDF Pod Point Plug & Power might be good for
The right answer depends on your equipment, routine and tolerance for changing prices—not just how much electricity you use.
Likely to suit
- EV owners who need a home charger and prefer to spread part of the hardware cost over a longer fixed arrangement
- Homes with off-street parking and a property likely to be suitable for home-charger installation
- Drivers who can charge mainly between 11pm and 6am
- Households happy to assess energy costs and charger finance together before signing
Less likely to suit
- Drivers who already have a charger and only want an electricity tariff
- Homes without practical home-charger installation options
- People who may move, change charger or switch supplier before the two-year arrangement ends
- Households with little overnight use or no ability to schedule EV charging
Before switching
Check the requirements and what will affect the result
What you need
- A fully connected smart meter with half-hourly readings for the electricity tariff
- A home suitable for a Pod Point Solo 3S installation, subject to Pod’s installation assessment
- A two-year fixed tariff and a separate charger-purchase arrangement with Pod
- An EDF electricity account; EDF says the tariff can be used with electricity only or as part of dual fuel
What drives what you pay
- The split between electricity used in the 11pm to 6am off-peak window and the day-rate hours
- How much EV charging can be scheduled at home overnight
- The electricity standing charge and unit rates in your regional quote
- The charger’s upfront payment, remaining cost and any non-standard installation work, which sit outside a simple energy-only calculation
Match the tariff to your home
Your largest electrical loads can change the answer
A specialist tariff can be better aligned with one large device, but its eligibility and expensive periods still matter. These are comparisons to make, not automatic recommendations.
If you have an EV
EDF Pod Point Plug & Power is already designed around electric-vehicle charging. Compare its cheap window, daytime rate, automation and compatibility with the alternatives before choosing.
If you have solar without a battery
The import tariff and the rate paid for exported electricity are separate decisions. A straightforward export tariff can be more useful than a peak-weighted battery tariff when generation is exported as it happens.
If you have solar and a home battery
A paired import/export tariff may fit better because a battery can charge in a cheap period and discharge or export in a more valuable one. The gross rate spread is not the same as profit after losses and degradation.
If you have a heat pump
A heat-pump tariff may align its cheaper periods with space and hot-water heating. Whether it wins depends on insulation, controls and how much heat can move away from expensive periods.
Alternatives
Other smart tariffs from Octopus and EDF to compare
These are other smart-tariff comparisons from the two suppliers, not a claim that every option suits the same household.
EDF Pod Power
Pod Power is designed for a household that already owns the qualifying Pod Point charger. Plug & Power is the route for someone buying a Solo 3S through EDF and Pod. Compare both tariffs’ live energy prices, but treat Plug & Power’s charger finance as a separate, material cost decision.
Review EDF Pod PowerEDF Go Electric
Go Electric is EDF’s electricity-only EV tariff. Plug & Power has a similar scheduled overnight use case but adds a charger purchase and a two-year commitment. It is only the better fit if the bundled charger arrangement works for your property and budget.
Review EDF Go ElectricOctopus Go
Octopus Go is an electricity tariff comparison. Plug & Power is a combined energy-and-hardware proposition, so compare the night rate, day rate and standing charge, then separately compare its charger cost, installation scope and exit terms with buying a charger independently.
Review Octopus GoOther EDF Energy tariff reviews
Browse every other EDF Energy tariff covered on Energy Review. Availability, eligibility and price structure are explained on each review.
Regional comparison
How prices differ across Great Britain
EDF Pod Point Plug & Power unit rate and standing charge by region
The average price per unit on 2026-08-11, including VAT. The table also shows the daily standing charge.
Hover a region for its figure, or select one to load its prices.
Tap a region to load its prices.
| Region | Per kWh | Standing charge per day |
|---|---|---|
| Yorkshire | 23.47p | 132.9p |
| North East England | 23.47p | 132.8p |
| Southern Scotland | 23.93p | 132.7p |
| West Midlands | 24.03p | 128.2p |
| East Midlands | 24.50p | 122.1p |
| Merseyside and North Wales | 24.53p | 139.3p |
| South Wales | 24.93p | 126.3p |
| South West England | 24.97p | 126.4p |
| Northern Scotland | 25.02p | 126.0p |
| Eastern England | 25.37p | 122.4p |
| South East England | 25.52p | 122.9p |
| Southern England | 25.83p | 118.2p |
| North West England | 25.84p | 116.1p |
| London | 26.29p | 113.3p |
Northern Ireland has a separate electricity market and is not covered by these regions.
How to switch
Moving to EDF Pod Point Plug & Power
- 1
Get an EDF quote and check the current Pod Point Plug & Power eligibility criteria for your address.
- 2
Confirm that your smart meter is connected and can send half-hourly readings before the tariff begins.
- 3
Read EDF’s tariff terms and Pod’s charger terms together, including the payment schedule, installation scope and what happens if you leave early or move home.
- 4
Once installed, schedule the car or charger to draw power between 11pm and 6am.
Frequently asked questions
What is included in Pod Point Plug & Power?
EDF and Pod combine a Pod Point Solo 3S charger purchase with a two-year fixed EV electricity tariff. The customer pays a reduced upfront amount for the charger and spreads the remaining cost under the accompanying arrangement. Check the current EDF and Pod terms for the exact price and installation scope.
When is the cheap electricity period?
Every night from 11pm to 6am. The live band schedule above shows the rates for your electricity region; use it to schedule charging and any other flexible household use.
Does the electricity estimator include the charger cost?
No. It estimates electricity from your stated use and the tariff’s live energy rates. The charge point has its own upfront payment, remaining cost and installation terms, so it must be added separately when comparing the full deal.
Can I use this tariff if I already own a charger?
Plug & Power is EDF’s charger-and-tariff package. If you already own a qualifying Pod Point Solo 3S charger, compare EDF Pod Power instead; otherwise ask EDF which current EV tariff it can offer for your charger and address.