Skip to main content
Energy Review

EDF Simply Tracker review (October 2026)

A fixed-term electricity and gas tariff that follows EDF’s standard variable prices, with a discounted standing charge and exit fees.

Live tariff data

EDF Simply Tracker prices for your area

Current prices for Southern England. Rates and standing charges vary by electricity region.

Showing prices for Southern England

Current rate

Southern England

Current unit rate
26.47p/kWh
The same displayed rate applies throughout the day.
Daily standing charge
40.96p/day
Charged once per day, separately from the unit rate.

No cheaper time of day

EDF Simply Tracker charges one rate at all times. It changes only when EDF Energy changes it, not on any daily cycle.

Use your own figures

What could a month on EDF Simply Tracker cost you?

Southern England

Enter your expected usage for a simple 30-day illustration using the displayed average unit rate and standing charge.

Enter the electricity you expect to use over 30 days.

Enter a number of kWh to see what it would cost at today’s average price.

The short answer

Who EDF Simply Tracker is most likely to work for

Simply Tracker is the straightforward EDF tracker: a price-cap-linked tariff with a lower standing charge, rather than a tariff that rewards timing. It can be useful for a home that wants a predictable saving without changing when it uses energy.

In its favour

  • Standing-charge discount guaranteed for the tariff term
  • No time-of-use windows to monitor or work around
  • Can be taken for electricity, gas or both
  • Prices can fall when the Ofgem price cap falls

Against it

  • Unit rates are not fixed for the term
  • Not a daily wholesale-market tracker
  • £25 early-exit fee per fuel
  • No special rate for EV charging, batteries or heat pumps
Read the fuller verdict and trade-offs

The trade-off is that it is neither a fixed deal nor a wholesale tracker. The price cap can still move the bill, and the exit fees make it less flexible than the standard variable tariff it is based on.

  • This is not a wholesale tracker. Its prices do not follow the day-ahead market and will not respond to windy or expensive days in real time.
  • The energy prices are variable. The fixed end date protects the standing-charge discount, not the unit rates against a price-cap increase.
  • An exit fee applies for each fuel. A dual-fuel customer leaving early may therefore pay two fees.
  • A standing-charge discount is most useful as a predictable saving; it does not make the unit rate cheaper when you use more energy.

Tariff facts at a glance

Current version
Simply Tracker Jan28
View product codeEDF_SIMPLY_TRACKER_JAN2028
Price changes
One unit rate
The price does not change during the day
Today’s full-day rate vs cap
In line with today’s cap rate
A full-day regional average is needed for today’s comparison
Estimated annual cost
£811
Illustration at the displayed rate for 2,500 kWh a year; future rate changes and your usage can change the bill. Includes 40.96p per day standing charge.

Key tariff facts

  • Fixed-rate tariff
  • £50 exit fee (FLAT)
  • Payment method varies · Single-register meter
  • No special smart-meter requirement
  • Electricity and gas are covered on this page

Against the price cap in Southern England

0.00p

below the price cap

Tariff today
26.47p/kWh
Ofgem cap
26.47p/kWh

Unit rates only. The cap also has a 47.81p/day standing charge; your cost depends on when you use electricity. Cap period: 1 Oct 2026–31 Dec 2026.

Estimated annual cost

£811

a year

Usage
2,500 kWh
Rate
26.47p/kWh

Uses the displayed rate and the 40.96p/day standing charge in Southern England. The figure changes when the rate changes.

EDF Energy: £880/year. This does not reconcile with the rates above.

On an Economy 7 meter

14.77p

night rate per kWh

Day rate
32.46p/kWh
Standing charge
49.50p/day

The seven off-peak hours vary by location and supplier. Check your meter’s schedule before planning storage heating, hot water or EV charging. See Ofgem’s Economy 7 guide.

EDF Energy: £1,079/year. Based on 3,400 kWh, so it is not directly comparable with the single-rate estimate.

View Economy 7 tariff codeEDF Simply Tracker: E-2R-EDF_SIMPLY_TRACKER_JAN2028-H

Gas

8.17p

per kWh

Standing charge
30.63p/day
Cheaper hours
None

One gas rate applies all day, so there is no usage window to target.

View gas tariff codeG-1R-EDF_SIMPLY_TRACKER_JAN2028-H

Price history

How EDF Simply Tracker prices have moved

The line is the average price for each day; no within-period range is shown when every displayed rate is the same.

Choose one history view

Use a rolling period to look back from today, or open one calendar year. Selecting either view replaces the other.

Rolling period

Currently showing

Counts backwards from today.

Calendar year

January to December, or the year to date.

1 of 30 periods are only partly covered by stored prices and are shown as they are rather than filled in.

Show these 30 figures as a table
Last 30 days average prices, pence per kWh
PeriodAverage
07 Sept25.62p
08 Sept25.62p
09 Sept25.62p
10 Sept25.62p
11 Sept25.62p
12 Sept25.62p
13 Sept25.62p
14 Sept25.62p
15 Sept25.62p
16 Sept25.62p
17 Sept25.62p
18 Sept25.62p
19 Sept25.62p
20 Sept25.62p
21 Sept25.62p
22 Sept25.62p
23 Sept25.62p
24 Sept25.62p
25 Sept25.62p
26 Sept25.62p
27 Sept25.62p
28 Sept25.62p
29 Sept25.62p
01 Oct25.66p
02 Oct25.66p
03 Oct25.66p
04 Oct25.66p
05 Oct25.66p
06 Oct25.66p
07 Oct25.66p
View history coverage and range

Combined across 6 versions of this tariff, each shown for the period it was on sale. We hold prices from Jun 2026. A gap means no version of this tariff was on sale then.

What this selected history can show

29 of 30 days are represented in the stored history. The figures below use complete daily or monthly periods only, so a partial period cannot create a false low or high.

This summary remains at daily or monthly level. Any separate statistics panel uses the complete daily distribution fields supplied by the rollup rather than inferring them from this chart.

Lowest complete-period rate
25.62p/kWh
Highest complete-period rate
25.66p/kWh
Mean of complete-period averages
25.63p/kWh

Regional comparison

How prices differ across Great Britain

EDF Simply Tracker unit rate and standing charge by region

The current unit rate and daily standing charge in each distribution region, including VAT.

Selected region

Southern England

Unit rate
26.47p/kWh
Standing charge
41.0p/day

Hover a region for its figure, or select one to load its prices.

Tap a region to load its prices.

Eastern England26.61pStanding charge per day: 45.0pEast Midlands25.36pStanding charge per day: 44.6pLondon26.59pStanding charge per day: 35.7pMerseyside and North Wales27.86pStanding charge per day: 60.8pWest Midlands25.60pStanding charge per day: 50.0pNorth East England25.45pStanding charge per day: 54.7pNorth West England26.49pStanding charge per day: 38.8pSouthern England26.47pStanding charge per day: 41.0pSouth East England26.88pStanding charge per day: 45.5pSouth Wales26.55pStanding charge per day: 48.6pSouth West England26.58pStanding charge per day: 49.0pYorkshire25.60pStanding charge per day: 54.3pSouthern Scotland26.11pStanding charge per day: 54.9pNorthern Scotland26.35pStanding charge per day: 48.3p
Cheapest: 25.36pDearest: 27.86p
CheapestDearest
View all regional prices
EDF Simply Tracker unit rate and standing charge by region, by region
RegionPer kWhStanding charge per day
East Midlands25.36p44.6p
North East England25.45p54.7p
Yorkshire25.60p54.3p
West Midlands25.60p50.0p
Southern Scotland26.11p54.9p
Northern Scotland26.35p48.3p
Southern England26.47p41.0p
North West England26.49p38.8p
South Wales26.55p48.6p
South West England26.58p49.0p
London26.59p35.7p
Eastern England26.61p45.0p
South East England26.88p45.5p
Merseyside and North Wales27.86p60.8p

Northern Ireland has a separate electricity market and is not covered by these regions.

Household fit

Who EDF Simply Tracker might be good for

The right answer depends on your equipment, routine and tolerance for changing prices—not just how much electricity you use.

Likely to suit

  • Households that want a price-cap-linked tariff without watching prices or shifting usage
  • Electricity-only, gas-only or dual-fuel homes that value a guaranteed reduction in daily charges
  • People who prefer a tariff that can fall with the price cap to a fixed-rate deal
  • Homes without a predictable overnight charging or heating pattern

Less likely to suit

  • Anyone looking for wholesale-market prices that change daily or half-hourly
  • Households wanting a fixed unit rate for the whole agreement
  • People who may need to leave a fixed-term deal soon
  • EV, battery or heat-pump owners who can make better use of a tariff with a dedicated cheap-use window

Before switching

Check the requirements and what will affect the result

What you need

  • Available for electricity, gas or both, subject to the tariff shown in your EDF quote
  • A fixed-term agreement with an early-exit fee of £25 per fuel
  • No time-of-use billing requirement: the same electricity unit rate applies throughout the day
  • Your quote confirms the current payment and meter options for your address

What drives what you pay

  • The Ofgem price cap, because EDF’s underlying Standard Variable prices move with it
  • Your electricity and gas consumption, with no time-of-use rate to shift between
  • The standing-charge discount, which is a daily saving rather than a discount only on units used
  • Your region and payment method, because EDF’s underlying Standard Variable prices differ by both

How it works

How EDF Simply Tracker sets its prices

EDF uses its Standard Variable prices as the starting point. When the Ofgem price cap changes, the electricity and gas prices on this tariff can move too. This is why the word “Tracker” here does not mean a daily or wholesale-linked tariff.

Read the full pricing explanation

EDF applies the saving through the daily standing charge, rather than cutting the unit rate. That makes the saving broadly independent of how many units a home uses: the charge applies each day, even when no energy is used.

The tariff has a fixed end date and EDF says an early-exit fee of £25 applies per fuel. The term gives the standing-charge discount a defined end point; it does not fix the energy rates for the whole period.

Alternatives

Other smart tariffs from Octopus and EDF to compare

These are other smart-tariff comparisons from the two suppliers, not a claim that every option suits the same household.

EDF Standard Variable

Simply Tracker follows the same price-cap basis as EDF’s Standard Variable tariff, but adds a standing-charge discount and a fixed term with exit fees.

More detail

Standard Variable has no exit fee; Simply Tracker is the better fit only if the discounted daily charge is worth giving that flexibility up for.

Review EDF Standard Variable

EDF Empower Tracker

Both follow EDF’s price-cap-linked base, but Empower changes the bill by time of day and has no standing charge.

More detail

Simply Tracker is flat all day and discounts the standing charge instead. Choose Empower only if you can genuinely use its cheaper hours and avoid its peak; Simply Tracker is the simpler option.

Review EDF Empower Tracker

Octopus Tracker

These tariffs share a name but not a pricing mechanism.

More detail

Octopus Tracker follows wholesale costs and changes daily; EDF Simply Tracker follows the Ofgem price cap and changes with EDF’s standard variable pricing. Compare the live rates and the amount of volatility you are willing to accept, not the word “Tracker”.

Review Octopus Tracker

What it costs if you do not pay by direct debit

The same tariff, averaged over the last 30 days in Southern England.

  • Electricity

    Monthly direct debit
    26.42p
    On receipt of bill
    27.89p

    Paying on receipt of a bill costs 1.47p more per kWh, about 5.6% more, over 30 days.

  • Gas

    Monthly direct debit
    7.52p
    On receipt of bill
    7.92p

    Paying on receipt of a bill costs 0.40p more per kWh, about 5.3% more, over 30 days.

Ofgem caps these payment methods separately. This is a payment-method comparison, rather than a reason to switch supplier.

How to switch

Moving to EDF Simply Tracker

  1. 1

    Get an EDF quote for your address and check the electricity, gas and payment options it offers you.

  2. 2

    Check the tariff end date and the £25 exit fee per fuel before accepting a switch.

  3. 3

    If you are moving from a fixed deal, check whether your current supplier has an exit fee and whether its fixed term is close enough to ending for that fee to be waived.

Frequently asked questions

Does EDF Simply Tracker follow wholesale energy prices?

No. EDF says its tracker tariffs follow the Ofgem price cap through EDF’s Standard Variable prices. The prices can change with the cap, normally every three months, rather than following daily wholesale prices.

Where does the saving come from?

EDF applies the saving through a discounted daily standing charge. It is not a cheaper overnight or off-peak unit rate, so using energy at a different time of day does not change the tariff’s unit price.

Can I get gas as well as electricity?

EDF markets Simply Tracker for electricity, gas or both. The quote for your address confirms the tariffs and prices available for each fuel.

Is there an exit fee?

Yes. EDF says an early-exit fee of £25 applies per fuel, so a dual-fuel customer leaving early may be charged for both electricity and gas.

Data source

EDF Energy · Public API tariff rates

Rob Gibbs

Written by

Rob Gibbs

Hi, I'm Rob, and I run Energy-Review.co.uk. I initially started this project in 2018 when I was looking to switch energy suppliers and found there wasn't a website that provided simple, data-backed reviews on all the suppliers available. Since then, I have spent a lot of time (too much, some may say!) looking at all publicly available data about each supplier and writing reviews using this information. These reviews are updated as regularly as possible, and any data is backed up by a source where necessary. I have also started writing guides on various energy-related topics, which hopefully you will find useful. If you find any issues, please use our contact form to let us know.