Skip to main content
Energy Review

EDF Standard Variable review (November 2026)

EDF’s default tariff for electricity and gas, priced at the Ofgem cap, with no exit fees.

Live tariff data

EDF Standard Variable prices for your area

Current prices for West Midlands. Rates and standing charges vary by electricity region.

Showing prices for West Midlands

Current rate

West Midlands

Current unit rate
25.60p/kWh
The same displayed rate applies throughout the day.
Daily standing charge
57.23p/day
Charged once per day, separately from the unit rate.

No cheaper time of day

EDF Standard Variable charges one rate at all times. It changes only when EDF Energy changes it, not on any daily cycle.

Use your own figures

What could a month on EDF Standard Variable cost you?

West Midlands

Enter your expected usage for a simple 30-day illustration using the displayed average unit rate and standing charge.

Enter the electricity you expect to use over 30 days.

Enter a number of kWh to see what it would cost at today’s average price.

The short answer

Who EDF Standard Variable is most likely to work for

Standard Variable is the flexible baseline: its rates are limited by the price cap, it has no fixed end date and you can leave without an exit fee.

In its favour

  • No exit fees and no term, so you can leave at any time
  • Falls automatically when the price cap falls
  • No smart meter or equipment required
  • Available for both electricity and gas

Against it

  • Rates can change when the price cap changes
  • Rises automatically when the cap rises
  • No reward for using electricity at cheaper times
  • Full standing charge regardless of how little you use
Read the fuller verdict and trade-offs

That flexibility can matter mid-move, mid-renovation or when you do not want a fixed term. Whether another tariff is cheaper depends on its current rates and how you use energy.

  • A capped tariff is not a capped bill: using more electricity or gas still increases what you pay.
  • The standing charge applies every day even if you use nothing, which makes this an expensive tariff for a second home or a very light user.
  • Prices change quarterly with no action from you, so a budget set in one quarter can be wrong in the next.

Tariff facts at a glance

Current version
Standard Variable
View product codeEDF_STANDARD_VARIABLE
Price changes
One unit rate
The price does not change during the day
Today’s full-day rate vs cap
In line with today’s cap rate
A full-day regional average is needed for today’s comparison
Estimated annual cost
£849
Illustration at the displayed rate for 2,500 kWh a year; future rate changes and your usage can change the bill. Includes 57.23p per day standing charge.

Key tariff facts

  • Variable-rate tariff
  • No exit fee on the selected offer
  • Payment method varies · Single-register meter
  • No special smart-meter requirement
  • Electricity and gas are covered on this page

Against the price cap in West Midlands

0.00p

below the price cap

Tariff today
25.60p/kWh
Ofgem cap
25.60p/kWh

Unit rates only. The cap also has a 57.23p/day standing charge; your cost depends on when you use electricity. Cap period: 1 Oct 2026–31 Dec 2026.

Estimated annual cost

£849

a year

Usage
2,500 kWh
Rate
25.60p/kWh

Uses the displayed rate and the 57.23p/day standing charge in West Midlands. The figure changes when the rate changes.

EDF Energy: £917/year. This does not reconcile with the rates above.

On an Economy 7 meter

14.35p

night rate per kWh

Day rate
31.54p/kWh
Standing charge
65.91p/day

The seven off-peak hours vary by location and supplier. Check your meter’s schedule before planning storage heating, hot water or EV charging. See Ofgem’s Economy 7 guide.

EDF Energy: £1,114/year. Based on 3,400 kWh, so it is not directly comparable with the single-rate estimate.

View Economy 7 tariff codeEDF Standard Variable: E-2R-EDF_STANDARD_VARIABLE-E

Gas

7.90p

per kWh

Standing charge
37.50p/day
Cheaper hours
None

One gas rate applies all day, so there is no usage window to target.

View gas tariff codeG-1R-EDF_STANDARD_VARIABLE-E

Price history

How EDF Standard Variable prices have moved

The line is the average price for each day; the shaded range shows the cheapest and most expensive prices within it.

Choose one history view

Use a rolling period to look back from today, or open one calendar year. Selecting either view replaces the other.

Rolling period

Currently showing

Counts backwards from today.

Calendar year

January to December, or the year to date.

Show these 30 figures as a table
Last 30 days average, cheapest and most expensive prices, pence per kWh
PeriodAverageCheapestMost expensive
05 Oct26.52p14.35p31.54p
06 Oct26.52p14.35p31.54p
07 Oct26.52p14.35p31.54p
08 Oct26.52p14.35p31.54p
09 Oct26.52p14.35p31.54p
10 Oct26.52p14.35p31.54p
11 Oct26.52p14.35p31.54p
12 Oct26.52p14.35p31.54p
13 Oct26.52p14.35p31.54p
14 Oct26.52p14.35p31.54p
15 Oct26.52p14.35p31.54p
16 Oct26.52p14.35p31.54p
17 Oct26.52p14.35p31.54p
18 Oct26.52p14.35p31.54p
19 Oct26.52p14.35p31.54p
20 Oct26.52p14.35p31.54p
21 Oct26.52p14.35p31.54p
22 Oct26.52p14.35p31.54p
23 Oct26.52p14.35p31.54p
24 Oct26.52p14.35p31.54p
25 Oct26.04p14.35p31.54p
26 Oct26.52p14.35p31.54p
27 Oct26.52p14.35p31.54p
28 Oct26.52p14.35p31.54p
29 Oct26.52p14.35p31.54p
30 Oct26.52p14.35p31.54p
31 Oct26.52p14.35p31.54p
01 Nov26.52p14.35p31.54p
02 Nov26.52p14.35p31.54p
03 Nov26.52p14.35p31.54p
View history coverage and range

Combined across 29 versions of this tariff, each shown for the period it was on sale. We hold prices from Mar 2016. A gap means no version of this tariff was on sale then.

What this selected history can show

30 of 30 days are represented in the stored history. The figures below use complete daily or monthly periods only, so a partial period cannot create a false low or high.

This summary remains at daily or monthly level. Any separate statistics panel uses the complete daily distribution fields supplied by the rollup rather than inferring them from this chart.

Lowest complete-period rate
14.35p/kWh
Highest complete-period rate
31.54p/kWh
Mean of complete-period averages
26.51p/kWh

Regional comparison

How prices differ across Great Britain

EDF Standard Variable unit rate and standing charge by region

The current unit rate and daily standing charge in each distribution region, including VAT.

Selected region

West Midlands

Unit rate
25.60p/kWh
Standing charge
57.2p/day

Hover a region for its figure, or select one to load its prices.

Tap a region to load its prices.

Eastern England26.61pStanding charge per day: 51.8pEast Midlands25.36pStanding charge per day: 51.5pLondon26.59pStanding charge per day: 42.9pMerseyside and North Wales27.86pStanding charge per day: 67.7pWest Midlands25.60pStanding charge per day: 57.2pNorth East England25.45pStanding charge per day: 61.6pNorth West England26.49pStanding charge per day: 45.7pSouthern England26.47pStanding charge per day: 47.8pSouth East England26.88pStanding charge per day: 52.3pSouth Wales26.55pStanding charge per day: 55.4pSouth West England26.58pStanding charge per day: 55.6pYorkshire25.60pStanding charge per day: 61.7pSouthern Scotland26.11pStanding charge per day: 61.4pNorthern Scotland26.35pStanding charge per day: 55.1p
Cheapest: 25.36pDearest: 27.86p
CheapestDearest
View all regional prices
EDF Standard Variable unit rate and standing charge by region, by region
RegionPer kWhStanding charge per day
East Midlands25.36p51.5p
North East England25.45p61.6p
Yorkshire25.60p61.7p
West Midlands25.60p57.2p
Southern Scotland26.11p61.4p
Northern Scotland26.35p55.1p
Southern England26.47p47.8p
North West England26.49p45.7p
South Wales26.55p55.4p
South West England26.58p55.6p
London26.59p42.9p
Eastern England26.61p51.8p
South East England26.88p52.3p
Merseyside and North Wales27.86p67.7p

Northern Ireland has a separate electricity market and is not covered by these regions.

Household fit

Who EDF Standard Variable might be good for

The right answer depends on your equipment, routine and tolerance for changing prices—not just how much electricity you use.

Likely to suit

  • Households that want no term, no exit fee and no decisions
  • Anyone about to move house or change circumstances, where flexibility is worth more than a small saving
  • Homes without a smart meter, which rules out most of the alternatives
  • People who expect the cap to fall and would rather follow it down

Less likely to suit

  • Anyone who could shift usage into cheap hours, since a time-of-use tariff would pay them for it
  • Households wanting a predictable annual bill — a fixed tariff does that and this does not
  • Very light users, who are paying a full standing charge for very little electricity
  • Anyone offered a fixed deal whose live total cost and terms are a better fit

Before switching

Check the requirements and what will affect the result

What you need

  • No requirements at all — no smart meter, no vehicle, no generation
  • Available for electricity, gas or both
  • Direct debit, pay on receipt of bill, and prepayment versions all exist, at different prices
  • No exit fees, no term

What drives what you pay

  • How much you use, which is the only lever this tariff gives you
  • Ofgem’s price cap, which resets quarterly and sets both the unit rate and the standing charge
  • Your region, since network costs differ across Great Britain
  • How you pay, because prepayment and pay-on-receipt are capped separately from direct debit

How it works

How EDF Standard Variable sets its prices

One unit rate and one standing charge, both limited by Ofgem’s price cap for your region, meter and payment method. There is no time-of-use element, so a single-rate customer pays the same unit rate at three in the morning as at six in the evening.

Read the full pricing explanation

The price cap limits unit rates and standing charges; it does not cap the total bill. It is recalculated quarterly from wholesale, network and policy costs, and EDF’s Standard Variable prices can move when it changes.

Prices differ by how you pay. Direct Debit, prepayment and pay-on-receipt versions are capped separately, so compare the current rate for your own payment method.

There are no exit fees, so you can move to any other tariff at any time. That is the tariff’s main practical virtue.

Alternatives

Other smart tariffs from Octopus and EDF to compare

These are other smart-tariff comparisons from the two suppliers, not a claim that every option suits the same household.

Flexible Octopus

The same thing at another supplier: the default variable tariff, priced at the cap, with no exit fees.

More detail

Differences between suppliers’ standard tariffs are small by design, because the cap sets the ceiling for all of them. Service, billing and how easily you can move to something better matter more than the pence.

Review Flexible Octopus

EDF Simply Fixed

The straight trade.

More detail

Fixing locks your rates for the term, which protects you if capped rates rise and can cost you if they fall. Compare the live annual estimate, standing charges, term and exit fees rather than assuming a fixed deal starts above or below today’s capped tariff.

Review EDF Simply Fixed

EDF Empower Tracker

Empower uses this tariff’s rate as its base, then takes 10p off in the early hours, adds 10p across the late afternoon and removes the standing charge.

More detail

It can suit an eligible low user who avoids the peak, but the banded calculation must confirm whether it improves on Standard Variable for that household.

Review EDF Empower Tracker

What it costs if you do not pay by direct debit

The same tariff, averaged over the last 30 days in West Midlands.

  • Electricity

    Monthly direct debit
    25.60p
    On receipt of bill
    27.04p

    Paying on receipt of a bill costs 1.44p more per kWh, about 5.6% more, over 29 days.

  • Gas

    Monthly direct debit
    7.90p
    On receipt of bill
    8.33p

    Paying on receipt of a bill costs 0.42p more per kWh, about 5.4% more, over 29 days.

Ofgem caps these payment methods separately. This is a payment-method comparison, rather than a reason to switch supplier.

How to switch

Moving to EDF Standard Variable

  1. 1

    Existing EDF customers can select Standard Variable, and customers may move onto it when a fixed deal ends. A newly moved household may initially be on EDF’s deemed tariff instead.

  2. 2

    Moving away is equally easy: there are no exit fees and no notice period, so any other tariff is available whenever you want it.

  3. 3

    If you have been on this tariff for a while, compare current alternatives using your region, payment method and consumption rather than assuming a headline national figure applies to you.

Frequently asked questions

Is this the same as the price cap?

It is protected by the price cap. Ofgem limits the unit rates and standing charges for each region, meter and payment method; it does not set a maximum total bill. The comparison card above uses the current regional figures available to the site.

How often do the prices change?

Whenever the price cap changes, currently every three months. EDF writes to you before each change.

Is prepayment more expensive?

It is capped separately from direct debit, and the two are priced differently. The figures on this page are for the single-rate direct debit version unless stated otherwise.

Should I fix instead?

It depends on what you think the cap will do and how much you value certainty. Fixing protects you from a rise and costs you a fall, and most fixed tariffs carry an exit fee where this one does not. There is no answer that is right for everyone.

Data source

EDF Energy · Public API tariff rates

Rob Gibbs

Written by

Rob Gibbs

Hi, I'm Rob, and I run Energy-Review.co.uk. I initially started this project in 2018 when I was looking to switch energy suppliers and found there wasn't a website that provided simple, data-backed reviews on all the suppliers available. Since then, I have spent a lot of time (too much, some may say!) looking at all publicly available data about each supplier and writing reviews using this information. These reviews are updated as regularly as possible, and any data is backed up by a source where necessary. I have also started writing guides on various energy-related topics, which hopefully you will find useful. If you find any issues, please use our contact form to let us know.